|
1. Remove 4 screws with the special GC screwdriver (aka gamebit) |
|
| |
| |
| 2. Lift the top part of your GC case gently. |
|
| |
| |
| 3. Remove the 4 screws behind the front panel |
|
| |
| |
| 4. Remove 5 screws at the right side of the drive |
|
| |
| |
| 5. Remove 4 screws on the backside of the drive |
|
| |
| |
| 6. Remove 2 screws at the fan unit |
|
| |
| |
| 7. Remove 3 underneath the fan unit |
|
| |
| |
| 8. Remove the drive unit and the fan unit gently
and remove 6 screw from the metal cooler. |
|
| |
| |
| 9. The installation area is marked below. |
|
